Simulation Quiz — Antenna Toolkit - Ansys Certifications

Total Available Time - 45 mins

Total Number of Questions - 15

Times up!

Antenna Toolkit — Simulation Quiz

Total number of questions - 4

Simulate the following cases using Antenna Toolkit before starting the quiz. For each case, create a new design and rename it.
Case A : Inset fed patch antenna as shown in workshop.

Case B : Inset fed patch antenna as shown in workshop with inset distance of 1mm.

Case C : Planar inverted F antenna with center frequency of 2.4 GHz and Duroid as substrate.

Case D : Planar inverted F antenna with center frequency of 2.4 GHz and FR-4 epoxy as substrate.

1 / 4

What happens to the resonance frequency of the inverted F antenna you have created, if the permittivity of the substrate material is increased? (Compare the results of case C and case D)

Shifts to higher value

Remains same

Shifts to lower value

2 / 4

In case A, what happens to the resonating frequency if the height of substrate is increased?

Frequency shifts to a higher value

No change

Frequency shifts to a lower value

3 / 4

In case B, what happens to the impedance matching if inset distance is changed to 1 mm as compare to case A?

Decreases

Increases

No change

4 / 4

In case C, what is the frequency range for which the S11 parameter is below -20 dB?

4.40 GHz to 4.45 GHz

1.40 GHz to 1.45 GHz

3.40 GHz to 3.45 GHz

2.40 GHz to 2.45 GHz

Your score is